Corten B steel

Corten B, as the symbol of weathering steel material, weathering resistant steel or atmospheric corrosion resisting steel. Even, some people called all the weathering steel as Corten Steel. Corten B steel started from North America.Corten steel widely used in air preheater,economizer,railway carriage,containers production,bridge building,construction and so on

Classification :

Weather Resistant Steel

+86 18560135906

evelyn@ppgiyehui.com

E-mail

RELATED PRODUCTS

ONLINE MESSAGE

PRODUCT DETAILS

Product introduction

Corten B steel
ASTM Corten B steel grade is a hot rolled products of structural steels in technical delivery conditions with improved atmospheric corrosion resistance.The steel grade Corten B is according to ASTM standard which with the yield strength of 355MPa and 345MPa which is based on the different thickness.
Corten B – a weather resistant steel which is better suited for heavy and load bearing structures.
The material forms its own protective layer when exposed to atmospheric elements. Essentially, the top layer corrodes which then protects the steel beneath it. The natural finish does not normally require any form of maintenance such as painting, which makes the material a highly cost effective alternative to other structural steels.
Painting and maintenance will be required if the structure is is continually wet as a protective layer will not form. An good example is where the base of the structure meets with the ground or is partially submerged.

Grades & Equivalents

Corten	EN 10025-5:2004
Corten B	S355J2W

Technical Data

Chemical Components

Grade	C	Si	Mn	P	S	Cu	Ni	Cr	V	N
Corten-A	0.12	0.25-0.75	0.20-0.50	0.07-0.15	0.03	0.25-0.55	0.65	0.50-1.25
Corten-B	0.16	0.30-0.50	0.80-1.25	0.03	0.03	0.25-0.40	0.4	0.40-0.65	0.02-0.10

ASTM Corten B steel Mechanical properties:
At room temperature for plates ≥3mm in thickness (transverse test specimans, according to EN 10002). Requirements to hot rolled plates ≤3mm in thickness according to EN 10025-5.

Grade	Thickness (mm)	Yield Strength MPa(min)	Tensile Strength MPa	Elongation % (min)
Corten B	≤16	355	470-630	20

1 Mpa = 1N/mm2
The impact energy is determined on ISO-V longitudinal test specimens at a temperature of - 20°C as an average of three tests. For product thicknesses ≥10mm the average value is at least 27 J. For thicknesses between 10mm and 6mm, the minimum impact value is reduced proportionally to the specimen width (product thickness).

Corten B Steel Delivery state

Hot Rolled, Cold Rolled, Normalized, Quenched, Tempering, Thermal Mechanical Control Process (TMCP), Electroslag Remelting Technical, HIC test.

Warehouse storage

Our products has been wildly sold to Northeast, North China, East China, Europe, Middle East, Southeast Asia, Australia and ect...Total area of our cooperation factory is approximately 58, 000 square meters, and registered capital is RMB 10 million Yuan, and fixed assets is RMB 50 million Yuan.

Packaging and shipping

The company specializes in selling steel, with best-selling products including PPGI, galvanized steel coil, steel plate, stainless steel plate, seamless welded steel pipe, aluminum coil, angle steel, H-shaped steel beam, and threaded steel. The product performance indicators have reached the advanced level in China. Our products have been widely sold to Northeast, North China, East China, Europe, the Middle East, Southeast Asia, Australia, etc

Customer communication

With the strategic thought of striving for survival on the basis of quality and development on the basis of benefit, adhering to management idea of "faith, practical, innovation, and development", we have courage to challenge, and keep continuous innovation in the competition.

Application area

We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.

COOPERATIVE PARTNER

FAQ

What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.

What product information do I need to provide?

A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.

Do you provide custom made Products service?

A: Yes,if you have your own design , we can produce according to your specification and drawing.

What about product prices information?

A:Prices various according to periodic price changes of raw materials.

Can you send samples?

A:Of course, we can provide customers with free samples and express shipping service to all over of the world.

It's my first time to import steel products, can you help me with it?

A:Sure,we have agent to arrange the shipment, we will do it together with you.

Weather Resistant Steel