图片名称
+
  • 2(25).jpg
  • 17.jpg
  • 6(21).jpg
  • images (6).jpg

WearTuf 400 Abrasion Resistant Steel Plates

WearTuf 400 is a versatile wear plate that combines abrasion
resistance with outstanding weldability and cold forming capabilities.

PRODUCT DETAILS

Product Introduction

Characteristics
WearTuf 400 is a fully martensitic Q&T abrasion resistant steel plate, having a hardness of average 400 Brinell. WearTuf 400 is a versatile wear plate that combines abrasion resistance with outstanding weldability and cold forming capabilities. The high impact toughness grants a very good crack resistance of the steel during fabrication and in service.

Dimensions
WearTuf 400 is supplied in the thickness rage of 4.0 - 50.0 mm and in the plate width of 900 – 3 100 mm. Supplied plate length from 4 000 to 18 000 mm.

Impact toughness
Typical 45J/-40°C (-40°F)
The impact toughness is given as absorbed energy at temperature, being the average of three full size Charpy-V test samples in longitudinal direction to rolling, according to EN ISO 148-1.

Hardness guarantee
Surface hardness:370-430 Brinell
Guaranteed hardness range, measured on a milled surface at a depth of 0.5 – 2.0 mm below the plate surface, according to ISO EN 6506-1.
Min center hardness:
Plate thickness ≤ 20mm: min 370 Brinell
Plate thickness > 20mm: 95% of min guaranteed surface hardness.

Applications
WearTuf 400 has found its application base among the traditional earth moving, mining and transport equipment, such as buckets, dumpers, tippers, crushers, hammers, conveyors and other mineral feeding systems. Being supplied in the thin and wide dimension range, WearTuf 400 also focuses on light weight wear design concepts and applications.

Ultrasonic testing
All plates delivered meets the Class E1, S1 requirement, according to EN 10 160.

Delivery condition
WearTuf 400 is delivered in the as quenched (Q) condition, and when found necessary in the condition of quenched and tempered (QT).
The plates are delivered with sheared or thermally cut edges.

Tolerances
The thickness tolerances of WearTuf 400 meets and exceeds the thickness tolerance of EN 10 029
Class A . Tolerances on shape, length, and width meets the requirements of EN 10029. Flatness tolerances conforms to EN 10 029 Class S or closer. 

Surface condition and properties
The delivered surface finish meets and exceeds that of EN 10163-2 Class A, Subclass 3.
The plates will be delivered as shot painted, using a low zinc silicate corrosion protective shop primer. Plates can also be delivered as unpainted.

Heat Treatment
Since the properties in the as delivery condition cannot be retained after exposure at service temperatures above 250°C, WearTuf 400 is not intended for any further heat treatment.

Processing performance
1) Bending, 
2) Welding, 
3) Cutting  
4) Machining

Technical Data

Chemical Composition
Ladle analysis: The steel is grain refined and fully killed, wt%

Thickness
(mm)
C
max
Si
max
Mn
max
P
max
S
max
Cr
max
Ni
max
Mo
max
B
max
CEV
Typical
CET
Typical
4.0 – 12.0 0.18 0.50 1.50 0.025 0.010 0.40 0.10 0.20 0.004 0.36 0.25
12.1 – 25.0 0.20 0.50 1.50 0.025 0.010 0.60 0.15 0.25 0.004 0.45 0.29
25.1 – 40.0 0.20 0.50 1.50 0.025 0.010 1.00 0.20 0.35 0.004 0.56 0.33
40.1 – 50.0 0.21 0.7 1.50 0.025 0.010 1.20 0.25 0.50 0.004 0.62 0.35

CEV = C + Mn/6 + (Cr + Mo + V)/5 + (Ni + Cu)/15
CET = C + (Mn + Mo)/10 + (Cr + Cu)/20 + Ni/40

Mechanical Properties

Yield strength
Rp0.2
Tensile strength
Rm
Elongation
A5
1000 MPa 1250 MPa 10%

Warehouse storage

Our products has been wildly sold to Northeast, North China, East China, Europe, Middle East, Southeast Asia, Australia and ect...Total area of our cooperation factory is approximately 58, 000 square meters, and registered capital is RMB 10 million Yuan, and fixed assets is RMB 50 million Yuan.

 

 

Packaging and shipping

The company specializes in selling steel, with best-selling products including PPGI, galvanized steel coil, steel plate, stainless steel plate, seamless welded steel pipe, aluminum coil, angle steel, H-shaped steel beam, and threaded steel. The product performance indicators have reached the advanced level in China. Our products have been widely sold to Northeast, North China, East China, Europe, the Middle East, Southeast Asia, Australia, etc

 

 

Customer communication

With the strategic thought of striving for survival on the basis of quality and development on the basis of benefit, adhering to management idea of "faith, practical, innovation, and development", we have courage to challenge, and keep continuous innovation in the competition.

 

 

Application area

We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.

 

COOPERATIVE PARTNER


图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称

FAQ

What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.

What product information do I need to provide?

A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.

Do you provide custom made Products service?

A: Yes,if you have your own design , we can produce according to your specification and drawing.

What about product prices information?

A:Prices various according to periodic price changes of raw materials.

Can you send samples?

A:Of course, we can provide customers with free samples and express shipping service to all over of the world.

It's my first time to import steel products, can you help me with it?

A:Sure,we have agent to arrange the shipment, we will do it together with you.

RELATED PRODUCTS


GET A FREE QUOTE