图片名称
+
  • 5(25).jpg
  • 2(28).jpg
  • 7(14).jpg
  • 17(3).jpg

Type 304 Stainless Steel

316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than 304, particularly higher resistance to pitting and crevice corrosion in chloride environments.

Classification :

PRODUCT DETAILS

Product introduction

316 is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. It has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.
316L, the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm).
316H, with its higher carbon content has application at elevated temperatures, as does stabilised grade 316Ti.
The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures.

Technical data

Chemical Composition

Grade   C Mn Si P S Cr Mo Ni N
316 Min - - - 0 - 16.0 2.00 10.0 -
Max 0.08 2.0 0.75 0.045 0.03 18.0 3.00 14.0 0.10
316L Min - - - - - 16.0 2.00 10.0 -
Max 0.03 2.0 0.75 0.045 0.03 18.0 3.00 14.0 0.10
316H Min 0.04 0.04 0 - - 16.0 2.00 10.0 -
max 0.10 0.10 0.75 0.045 0.03 18.0 3.00 14.0 -


Mechanical Properties

Grade Tensile Str (MPa) min Yield Str 0.2% Proof (MPa) min Elong (% in 50 mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316 515 205 40 95 217
316L 485 170 40 95 217
316H 515 205 40 95 217

Note: 316H also has a requirement for a grain size of ASTM no. 7 or coarser.

Physical Properties

Grade Density(kg/m3) Elastic Modulus (GPa) Mean Co-eff of Thermal Expansion (µm/m/°C) Thermal Conductivity (W/m.K) Specific Heat 0-100 °C (J/kg.K) Elec Resistivity (nΩ.m)
0-100 °C 0-315 °C 0-538 °C At 100 °C At 500 °C
316/L/H 8000 193 15.9 16.2 17.5 16.3 21.5 500 740


Grade Specification Comparison

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
316 S31600 316S31 58H, 58J 1.4401 X5CrNiMo17-12-2 2347 SUS 316
316L S31603 316S11 - 1.4404 X2CrNiMo17-12-2 2348 SUS 316L
316H S31609 316S51 - - - - -

Note: These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Possible Alternative Grades

Grade Why it might be chosen instead of 316?
316Ti Better resistance to temperatures of around 600-900 °C is needed.
316N Higher strength than standard 316.
317L Higher resistance to chlorides than 316L, but with similar resistance to stress corrosion cracking.
904L Much higher resistance to chlorides at elevated temperatures, with good formability
2205 Much higher resistance to chlorides at elevated temperatures, and higher strength than 316

 

Warehouse storage

Our products has been wildly sold to Northeast, North China, East China, Europe, Middle East, Southeast Asia, Australia and ect...Total area of our cooperation factory is approximately 58, 000 square meters, and registered capital is RMB 10 million Yuan, and fixed assets is RMB 50 million Yuan.

 

 

Packaging and shipping

The company specializes in selling steel, with best-selling products including PPGI, galvanized steel coil, steel plate, stainless steel plate, seamless welded steel pipe, aluminum coil, angle steel, H-shaped steel beam, and threaded steel. The product performance indicators have reached the advanced level in China. Our products have been widely sold to Northeast, North China, East China, Europe, the Middle East, Southeast Asia, Australia, etc

 

 

Customer communication

With the strategic thought of striving for survival on the basis of quality and development on the basis of benefit, adhering to management idea of "faith, practical, innovation, and development", we have courage to challenge, and keep continuous innovation in the competition.

 

 

Application area

We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.

 

COOPERATIVE PARTNER


图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称
图片名称

FAQ

What ports of shipment are there?

A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs.

What product information do I need to provide?

A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.

Do you provide custom made Products service?

A: Yes,if you have your own design , we can produce according to your specification and drawing.

What about product prices information?

A:Prices various according to periodic price changes of raw materials.

Can you send samples?

A:Of course, we can provide customers with free samples and express shipping service to all over of the world.

It's my first time to import steel products, can you help me with it?

A:Sure,we have agent to arrange the shipment, we will do it together with you.

RELATED PRODUCTS


GET A FREE QUOTE